Classic Airgun Blog

A .22-cal, 8-inch barrel Model 112   The Crosman series of bulk fill CO2 pistols and rifles were produced from 1950 to 1955. They are a rugged, straightforward design that will give many years of service when properly maintained. Unfortunately many of these guns have spent years without use or lubrication and will no longer hold pressure. In this case you can either send your gun off to be repaired or do the job yourself. There are a number of people who will do the job for a reasonable price. I have used Rick as Precision Pellet and can recommend him for parts and service; I have not used any one else but a question posted on almost any forum will get you a number of names.  If you choose to do the job yourself you will need a seal kit; these can be purchased from many sources. You will also need to make two custom tools for proper disassembly. If you have done air gun or firearm repairs this job should not be too difficult. One thing to remember is that a number o...

Note: this article was originally posted to my Google Pages location back in 2010.  Now that Google has seen fit to retire Pages, and I was too lazy to convert my content in time, I have finally started this blog site.  A friend of mine is the owner of an excellent condition Haenel 303, made in East Germany in the early 1980's.  I did a review on this rifle as a guest blogger for Pyramyd Air Air   here .  That article goes into detail about the features and performance of the gun and I don't want to repeat all of that here. What I do want to cover is the disassembly process to be able to clean and lube the gun.  The Haenel was not terribly difficult to work on; no special tools were required.  It was the first springer that I have taken apart and it still only took about four hours one Sunday afternoon.  It is also interesting to examine a few of the features of the construction of the 303 with it apart.  I must apologize for the...